3D in Cultural Heritage Event in Rome was a success

Find out about the aftermath of the event.

Posted on: 6 June 2023

Share

img. courtesy of Piero Masi

The first public event of EU funded project EUreka3D is organized by project coordinator Photoconsortium in Rome on 6th June 2023. The conference 3D in Cultural Heritage is integral part of the DHCH 2023 initiative on Data Science, and is realized by EUreka3D project in collaboration with University of Basel Digital Humanities Lab and Istituto Svizzero.

 

The event is realized under the auspices of the Italian Ministry of Enterprises and Made in Italy.

The event was a success with ca. 50 participants in the room and over 120 connected online. The post-event survey reported that 100% of respondents agree the event was useful in their work or for personal knowledge.

Few comments collected from the audience:

– The exhibition of practical cases are always to useful to understand the use of 3D digitization in various fields.
– The most useful part of the webinar were technicalities behind 3D imaging and would love to hear more about technical part of photogrammetry.
– I 100% agree with Valentina about the European Viewer Platform and I would like learn more about archives, storage and digital preservation. Thank you for everything, it was a great event.

It’s possible to view and download all the presentations of the various speakers by going to the Agenda section below.

3D in Cultural Heritage is an event of the training and capacity building programme of EUreka3D project, to support cultural heritage institutions in the process of digital transformation and in the effort of advancing with 3D digitization of cultural collections.

>>> DOWNLOAD PROGRAMME (PDF)

The event aimed to help understanding the challenges and needs for creating 3D content in good quality and reusable, and it brought together experts and specialists on 3D digitization and holistic documentation of 3D cultural content. It was the best occasion for institutions, researchers, cultural professionals and students in cultural heritage to improve their skills, knowledge and capacity for the current scenario of digital transformation in the cultural sector.

After the welcome messages from the Istituto Svizzero, the University of Basel and Dr. Mauro Fazio, from the Italian Ministry of Enterprises and Made in Italy, the event opened with an introduction on EUreka3D project by Dr. Antonella Fresa (Photoconsortium), the project coordinator.

Then, the event was organized in two sessions.

During Session 1, the current scenario of development in the cultural sector was discussed, and why reusable 3D content in good quality is needed: keynote speeches from Valentine Charles (Europeana Foudation), Marinos Ioannides (Cyprus University of Technology) and Frederik Temmermans (VUB/imec) provided the most recent information on the trends of the cultural heritage sector, and best practices and technological insights on the matter of 3D digitization of heritage sites and collections.

After that, during Session 2, the event focused on important experiences of international projects dedicated to 3D digitization and the use of 3D in cultural heritage, with the contributions of Timothy Naessens (meemoo),  Ismo Malinen (Museovirasto), Peter Fornaro and Vera Chiquet (University of Basel), and Ana Busom Arruebo and Albert Sierra (GENCAT).

Question and answer time allowed the participants onsite and onlineto interact with the speakers and join the conversation.

[Show picture list]

AGENDA AND PRESENTATIONS FOR DOWNLOAD

3D in Cultural Heritage –  EUreka3D public event

Istituto Svizzero, Villa Maraini, Via Liguria 20, 00187 Roma

6th June 2023 h. 9.30-13.15

h. 9.30 Opening

  • Welcome messages by Istituto Svizzero and University of Basel
  • Welcome message by Dr. Mauro Fazio, Ministero delle Imprese e del Made in Italy
  • Introduction on EUreka3D project and scope of the event, by Dr. Antonella Fresa, Photoconsortium (PDF)

Session 1 – Current scenario in the cultural sector: the need for 3D content in good quality and reusable

  • h.10.00 Valentine Charles (Europeana Foundation, NL): The new Data Space for Cultural Heritage (PDF)
  • h. 10.20 Marinos Ioannides and Petros Siegkas (Cyprus University of Technology, CY): The VIGIE Study for high quality 3D digitization (PDF)
  • h. 10.40 Frederik Temmermans (imec, BE): Standardisation activities for 3D modalities (PDF)

Question and answer time

Coffee break

Session 2 – Experiences with projects for 3D in cultural heritage

  • h. 11.40 Vera Chiquet (University of Basel, CH): Facilitating small CHIs in digitization for 3D Models, a case study with the Museum of Learning (PDF)
  • h. 12.00 Ismo Malinen (Museovirasto, FI): 3D digitization of World Heritage Sites in Finland (PDF)
  • h. 12.20 Timothy Naessens (meemoo, BE): 3D digitization of sculptures in the context of GIVE Flemish masterpieces project (PDF)
  • h. 12.40 Ana Busom Arruebo, Albert Sierra (GENCAT, ES): Giravolt, the National project for 3D digitization of Catalan heritage (PDF)

Question and answer time

h. 13.15 Conclusion

Attend in Rome, register here.
Follow the conference online on Zoom here.

image of Villa Maraini, Istituto Svizzero di Roma

 

Leave a Reply

Related Articles

EUreka3D training in Girona
As a side activity of the EUreka3D Final Conference in Girona, partner CRDI organized a public workshop expressely addressed to catalan cultural institutions and other local professionals. The scope of the workshop was to provide training on 3D digitization according to EUreka3D methodologies, and also to discuss strategies for the dissemination of 3D digitisation projects. In particular, the training included a presentation the 3D Digitisation Guidelines and the EUreka3D Final Booklet, by Da...
Mongolian Students trained with EUreka3D digitization guidelines
As part of the ERASMUS+ ARTEST programme, EUreka3D partner CUT hosted four early career researchers from the Mongolian University Science and Technology and the Mongolian National University of Arts and Culture. Over the 10 day training period the exchange students undertook training in the digitisation of CH objects using the EUreka3D guidelines for documentation as the basis for their work. The collaboration between ARTEST and EUreka3D was initiated early in 2024, also with a coordinatio...
EUreka3D training in Nancy
On 27 November 2027, partner Bibracte together with colleagues of associate partner Archeovision organized a training meeting for demonstrating the work done in EUreka3D for the digitisation and aggregation to Europeana. In particular, the workshop presented the features and workfow of the EUreka3D Data Hub to the members of the 3D consortium that manages the French National 3D Conservatory. The challenges encountered by Bibracte in making their 3D collection interoperable between the ...
UNESCO World Heritage Site Church of Timios Stavros successfully 3D digitised
  The EUreka3D project partner UNESCO Chair on Digital Cultural Heritage at Cyprus University of Technology’s (CUT) Digital Heritage Research Lab (DHRLab) processed the record of the 14th-century Church of Timios Stavros (Holy Cross) at Pelendri village to provide an HBIM reference model aiding conservators and architects in the maintenance and protection of the building as part of the EUreka3D project. The model, and its accompanying data, will be made publicly accessible thr...